What is Engineering Hot Water Thermostatic Mixer

Engineering hot water thermostatic mixer is developed to meet the technical requirements of large-scale, automated and user-friendly development of central hot water projects. Automatic bath water constant temperature control equipment. Widely used in hotels, restaurants, schools, hospitals, factories and mines, institutions and bathing centers, swimming pools and other large, medium and small domestic hot water systems. The user can select the model according to the actual water consumption of the hot water system, and the user can adjust and set the temperature of the bath water outlet, and realize the automatic control of the bath water temperature with high precision.
How this paragraph works
The working principle of the thermostatic mixer: when the heating medium water and the cold water enter the mixing chamber of the machine at the same pressure ratio at the same time, the cold and hot water are mixed, and the application water after the cold and hot mixing enters the buffer chamber. The water temperature sensor in the buffer chamber transmits the water temperature signal to the temperature control device. When the water temperature in the buffer chamber is higher (or lower) than the set requirement, the temperature control device performs the hot water from the hot water tank and the tap water (or cold water in the cold water tank). Proportional control controls the heating medium water and cold water in a moderate flow state, so that the output water temperature reaches the set requirements and the system water is kept at a constant temperature.
The performance characteristics of this section
Ⅰ It realizes automatic control of hot and cold water without using electricity or external power, and realizes energy saving and consumption reduction; Ⅱ Proportional control method is adopted for cold and hot water, with high control accuracy, and the control accuracy can reach ±1℃ within the range of technical requirements;
Ⅲ The user can adjust the set temperature steplessly at will, with a wide adjustment range, which can be arbitrarily set between 30°C and 95°C;
Ⅳ When the cold water is cut off, the hot water is automatically turned off at the same time, which is safe and anti-scalding, and you can take a bath with confidence;
Ⅴ The use of this machine does not require manual real-time adjustment of water temperature, which is comfortable and energy-saving, can save more than 20% of water, and effectively prolongs the use time of china Copper heater manufacturer real-time unit hot water;
Ⅵ No vulnerable parts, long service life, not affected by environmental changes, stable performance;
Ⅶ The machine is small in size, easy to install, and ready to use when connected.
This section is installed and used
The thermostatic mixer can adapt to the maximum working temperature of hot water <110 degrees. It adopts a special design and is not easy to scale. The performance of the temperature sensing probe is not attenuated for a long time to ensure the sensitivity. During installation, you only need to connect the hot and cold water inlet and constant temperature water outlet to the corresponding pipeline to work. It is easy to install, saves man-hours, and fast in construction. The machine can also be used in heat pump systems, central air conditioning systems, boiler hot water systems and other Constant temperature control of the same medium fluid in the industry.

Kettle Thermostat Couplers

Name:	Couple/Kettle Thermostat
Material:	Plastic and  Stainless steel,copper
Processes	Wave soldering machine,shell injection molding machine,SMT placement machine,(wave soldering-aging test-Semi-finished product test-plastic mold forming )
Describe	Good material, small dimensional tolerance, good performance (suitability), and good surface quality.
QC	Dimensinal toleranceis available Technicians self-check in production Engineer spot check in production QC inspects after mass production finished Spot check before shipping
Packing	Boxes, Carton, Pallet or as per customers requirement
Advantage	OEM service and Design service are available Min order and sample order is acceptable. Reply to your inquiries in 24 hours. Your detail requirements will be responded within 24 hours. Your needs will always be treated as our top priority. Delivery the high quality goods on time.