Instructions for water heating pipe

Instructions for water heating pipe:
1. The water heating pipe must be completely immersed in liquid for use. This element must not heat gas or solids.
2. The heated liquid does not contain substances that should not corrode the elements. During use, the scale or carbon deposit on the pipe surface should be removed frequently, otherwise the efficiency and life of the elements will be affected.
3. The working voltage of the electric heating element shall not exceed 1.1 times of its rated value, the ambient humidity shall not exceed 95%, and the shell shall be effectively grounded.
4. The electric heating element of the water heating tube should be stored in a dry place. If its insulation resistance to the ground is lower than 1M Ω due to long-term storage, it can be recovered after drying in an oven at about 200 ℃ for several hours.
5. When fastening the main thread of the water heating pipe, do not exert too much force on the connector.